Export connection
-
martinuriarte73
Topic author - Messages : 13
- Enregistré le : 13 sept. 2009, 00:42
- Prénom : Martin
Export connection
Bonjour,
Sorry but my French is not good enough so I'll write in English. I understand French so you may reply in French.
I am a novel bike rider in Belgium and I am thinking about getting a Royal Enfield. Howvere I am not sre if I want to spend 6000 EUR on a Classic bullet.
A few questions:
1. I have seen some adverts on Ebay from a company called "Export Connection" that restores old Enfields in India and send them to Europe. Are they reliable? Any experience or heard anything about them?
2. Any places in Belgium were I could get a second hand and in a decent state Enfield (no major problems)?
3. How difficult is to import an Enfield form the UK into Belgium. Is it difficult or possible to register it Belgium?
4. any tips/ideas. BAsically I have been dreaming about having an Enfield for years now and I would like to get one but without investing a lot of money on my first bike. Any ideas as to ho to get a not too expensive Enfiled (second hand if necessary) but without nasty surprises?
Thanks,
Martin
Sorry but my French is not good enough so I'll write in English. I understand French so you may reply in French.
I am a novel bike rider in Belgium and I am thinking about getting a Royal Enfield. Howvere I am not sre if I want to spend 6000 EUR on a Classic bullet.
A few questions:
1. I have seen some adverts on Ebay from a company called "Export Connection" that restores old Enfields in India and send them to Europe. Are they reliable? Any experience or heard anything about them?
2. Any places in Belgium were I could get a second hand and in a decent state Enfield (no major problems)?
3. How difficult is to import an Enfield form the UK into Belgium. Is it difficult or possible to register it Belgium?
4. any tips/ideas. BAsically I have been dreaming about having an Enfield for years now and I would like to get one but without investing a lot of money on my first bike. Any ideas as to ho to get a not too expensive Enfiled (second hand if necessary) but without nasty surprises?
Thanks,
Martin
-
Thierry
- Le moteur tourne bien
- Messages : 1016
- Enregistré le : 25 mai 2006, 20:03
- Modèle de votre autre moto : Plus de R.E .......Pour l'instant
- Prénom : Thierry
- Localisation : quelque part dans le monde
- Localisation : Bientot à Angers
- Contact :
Re: Export connection
Bonjour et bienvenue ici, i y a plein de belges qui pourront te repondrent......
Ce n'est pas parceque c'est difficile que nous n'osons pas, c'est parceque nous n'osons pas que c'est difficile..... (Sénèque)
Re: Export connection
Guten Tag kannst Du dich bei cose und Brigitte, er erkundigen, haben Re angleterre gekauft.
[*][*][*]
-
martinuriarte73
Topic author - Messages : 13
- Enregistré le : 13 sept. 2009, 00:42
- Prénom : Martin
Re: Export connection
Dank u Pat,
Unfortunately I do not understand Flemish and I am not quite sure what you replied
Unfortunately I do not understand Flemish and I am not quite sure what you replied
-
Ded31
- Bienvenue au paradis des RE
- Messages : 27796
- Enregistré le : 23 sept. 2007, 20:04
- Votre moto : 500 Bullet Fonte
- Modèle de votre autre moto : Bullet 612 Fonte boite bon coté, Guzz V7 IV Espéciale 850.
- Prénom : Didier
- Localisation : Toulouse (Ramonville)
- Contact :
Re: Export connection
martinuriarte73
Je pense que les Belges vont te répondre en détail !Quand on n'aime pas un dessin, on ne tue pas les gens, on en fait un plus joli - (Léa 6 ans).
---------------------oOo--------------------
C'est avec les vieilles "fontes" qu'on fait les meilleurs trips !!!
http://ded31-royal-blog.blogspot.com/
---------------------oOo--------------------
C'est avec les vieilles "fontes" qu'on fait les meilleurs trips !!!
http://ded31-royal-blog.blogspot.com/
Re: Export connection
martinuriarte73 a écrit :Dank u Pat,
Unfortunately I do not understand Flemish and I am not quite sure what you replied
I say that it is necessary to approach you Cose and Brigitte which(who) have import Royal enfield English one;
[*][*][*]
-
Utilisateur1
- Bullet 500
- Messages : 5103
- Enregistré le : 03 mars 2007, 11:28
- Votre moto : Pas de moto
- Localisation : France
Re: Export connection
This was posted here fews days ago :
Auteur Message
jenot
Sujet du message: vente de 500 fontePublié: Lun 07 Sep 2009 22:20:45
Membre Royal Association
Inscrit le: Mar 30 Oct 2007 22:46:35
Messages: 32
Localisation: haute marne
je vends ma bullet 500 fonte boite à droite
premiére immat 07/2000 je l'ai depuis 23mois et j'ai fait 300km avec ,elle totalise moins de 4000km,
+quelques pieces,kit selection,cables,sacoches cavalieres en toile,béquille latérale.
faire offre.
accepterait échange contre italienne ou autre avec selection à gauche
mon mail est jpr.jenot@wanadoo.fr
à bientôt
jp jenot
_________________
jean philippe jenot
BETTER WAY THAN "Export Connection " ( I've got an Export Connection )
Auteur Message
jenot
Sujet du message: vente de 500 fontePublié: Lun 07 Sep 2009 22:20:45
Membre Royal Association
Inscrit le: Mar 30 Oct 2007 22:46:35
Messages: 32
Localisation: haute marne
je vends ma bullet 500 fonte boite à droite
premiére immat 07/2000 je l'ai depuis 23mois et j'ai fait 300km avec ,elle totalise moins de 4000km,
+quelques pieces,kit selection,cables,sacoches cavalieres en toile,béquille latérale.
faire offre.
accepterait échange contre italienne ou autre avec selection à gauche
mon mail est jpr.jenot@wanadoo.fr
à bientôt
jp jenot
_________________
jean philippe jenot
BETTER WAY THAN "Export Connection " ( I've got an Export Connection )
-
mimi.lulu
- Membre RA 2025
- Messages : 21792
- Enregistré le : 30 juin 2006, 10:31
- Votre moto : Side-car RE 650 Interceptor Watsonian
- Modèle de votre autre moto : Bullet 350 Black, 49,9cc Piaggio Bravo 1976, Solex 3800 de 1967
- Prénom : Jean-Luc
- Localisation : Sazilly
Re: Export connection
Hi Martin,
You can see my small experience with Export Connection here. One thing: be patient...
For me it was a success. Good luck!
You can see my small experience with Export Connection here. One thing: be patient...
For me it was a success. Good luck!
ツ
Jean-Luc aka mimi.lulu - ex-administrateur

Il n'y a aucune urgence, il n'y a que des gens en retard.
Jean-Luc aka mimi.lulu - ex-administrateur

Il n'y a aucune urgence, il n'y a que des gens en retard.
-
mimi.lulu
- Membre RA 2025
- Messages : 21792
- Enregistré le : 30 juin 2006, 10:31
- Votre moto : Side-car RE 650 Interceptor Watsonian
- Modèle de votre autre moto : Bullet 350 Black, 49,9cc Piaggio Bravo 1976, Solex 3800 de 1967
- Prénom : Jean-Luc
- Localisation : Sazilly
Re: Export connection
GEDEON 03 a écrit :BETTER WAY THAN "Export Connection " ( I've got an Export Connection )
I don't agree. It depend of what you want to buy. If you want a side-car not expansive and to not spend too much money, Export Connection is a good way.
ツ
Jean-Luc aka mimi.lulu - ex-administrateur

Il n'y a aucune urgence, il n'y a que des gens en retard.
Jean-Luc aka mimi.lulu - ex-administrateur

Il n'y a aucune urgence, il n'y a que des gens en retard.
-
martinuriarte73
Topic author - Messages : 13
- Enregistré le : 13 sept. 2009, 00:42
- Prénom : Martin
Re: Export connection
Merci Jean Luc, Jean Philippe et al.
Jean Luc, interesting and helpful blog!
Any alternatives in Europe? I would rather drive to the UK, France, Germany, etc and pick up a second hand Enfield that I can test ride. No need to be a restorated classic - I am not a purist
Any ideas/advise welcome!
Jean Luc, interesting and helpful blog!
Any alternatives in Europe? I would rather drive to the UK, France, Germany, etc and pick up a second hand Enfield that I can test ride. No need to be a restorated classic - I am not a purist
Any ideas/advise welcome!
-
three wheels
- Bullet 350
- Messages : 4621
- Enregistré le : 06 juin 2007, 20:53
- Votre moto : Autre side-car
- Modèle de votre autre moto : BMW/Steib
- Prénom : Daniel
- Localisation : A s'baraque
- Localisation : 59 SECLIN
Re: Export connection
Hi Martin, have a look there: http://www.locotrans.net/
Giorgio is charming and speak english very well !!!
Giorgio is charming and speak english very well !!!
Le side c'est un truc de vicieux, tous les inconvénients de la moto et de la voiture réunis.
Mais qu'est ce que c'est bon d'assouvir son vice !!!
Mais qu'est ce que c'est bon d'assouvir son vice !!!
-
martinuriarte73
Topic author - Messages : 13
- Enregistré le : 13 sept. 2009, 00:42
- Prénom : Martin
Re: Export connection
Thank you druid!
druid a écrit :Hi Martin,
If you are looking for a reliable refurbished Royal-Enfield Bullet, you can also get in touch with our english friend Henry PRICE . Henry is a trustworthy man who sells motorcycles ans spare parts at quite a reasonable price.
http://www.pricepartmotorcycles.co.uk/
-
Pongo
- Messages : 24
- Enregistré le : 06 sept. 2009, 20:42
- Modèle de votre autre moto : 350 Classic
- Prénom : John
- Localisation : Haute -Vienne
Re: Export connection
Hi Martin,
I am English , but live in the Limousin region of France.
I have just imported from the u.k. a 12/2008 350 Bullet Classic( 750 kms) and had it delivered to my door by 'Bike Movers U.K.' for just under £2500 for the whole deal. I bought it through an ebay connection. I suggest you look through the U.K. dealer sites which you will find through the Watson Squire importers site http://www.Royal-Enfield.com There are some good deals about.
Importing a new or nearly new bike from the U.k. should be straightforward to re-register in Belgium, as the European certificate of conformity number is shown on the English registration document.
Direct Imports from India could be a problem to register , as they do not conform to the latest (2009) emission control standards. They are genuine rebuilt classics to new condition. I considered one myself, but the amount of work needed to comply was costly. I am sure that the quality of restoration is acceptable as they are all rebuilt from genuine parts, but they will arrive with an Indian registration number, NOT as an unregistered machine, and that is where the problems start.!
Hope this helps a bit!
I am English , but live in the Limousin region of France.
I have just imported from the u.k. a 12/2008 350 Bullet Classic( 750 kms) and had it delivered to my door by 'Bike Movers U.K.' for just under £2500 for the whole deal. I bought it through an ebay connection. I suggest you look through the U.K. dealer sites which you will find through the Watson Squire importers site http://www.Royal-Enfield.com There are some good deals about.
Importing a new or nearly new bike from the U.k. should be straightforward to re-register in Belgium, as the European certificate of conformity number is shown on the English registration document.
Direct Imports from India could be a problem to register , as they do not conform to the latest (2009) emission control standards. They are genuine rebuilt classics to new condition. I considered one myself, but the amount of work needed to comply was costly. I am sure that the quality of restoration is acceptable as they are all rebuilt from genuine parts, but they will arrive with an Indian registration number, NOT as an unregistered machine, and that is where the problems start.!
Hope this helps a bit!
Modifié en dernier par Pongo le 15 sept. 2009, 07:55, modifié 1 fois.
-
Jackymoto
- Membre RA 2025
- Messages : 28488
- Enregistré le : 14 janv. 2007, 20:47
- Localisation : quelque part dans le monde
- Localisation : Limoges
Re: Export connection
It is only rentable to import a side-car from India,and the papers should be 30 years old,for French collection papers.
I don't know the law in Belgium.
A solo,as say Pongo,is cheaper in Europa(and are registrable models).
Salut Pongo,i know that you exist because my friend Dan saw you few days ago..
I don't know the law in Belgium.
A solo,as say Pongo,is cheaper in Europa(and are registrable models).
Salut Pongo,i know that you exist because my friend Dan saw you few days ago..
